Changing To The Front Eject Position - Epson TM-m30 Technical Reference Manual

Changing to the Front Eject Position

You can change the eject position by replacing the rear cover and the bottom cover. At the time of purchase,
paper is ejected from the top position. When changing to the front eject position, follow the steps below to
replace the covers.
1
Remove the bottom cover and the rear cover.
See the detailed information on
2
Attach the rear cover and the bottom cover.
See the detailed information on
"For the top eject position" on page
"For the front eject position" on page
Chapter 2 Setup
93.
96.
2
29