Resetting The Interface Settings - Epson TM-m30 Technical Reference Manual

Resetting the Interface Settings

Follow the steps below to restore the network settings to the factory defaults.
1
Turn off the printer and close the roll paper cover.
2
If the bottom cover is attached, remove the cover.
See "Removing the Covers" on page 93
3
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
72
You can return the interface settings to their defaults from the Interface Setup mode. See
Setup Mode" on page 65 for details on the Interface Setup mode.
for details on removing the bottom cover.
"Interface