Status And Errors; Status Display - Epson TM-m30 Technical Reference Manual

Status and Errors

The status of the printer is indicated by lit and flashing LEDs.

Status Display

Power Error
LED LED
N O
N O
N N
N O
N N
N N
N N
N F
F O
F O
-
F
F O
-: Changes depending on whether or not paper is detected.
You cannot print when an error has occurred.
You cannot identify the error by the flashing patterns of the LEDs. Develop the application so that
users can identify the error description and check the solutions.
Paper
LED
Online
O
- During a self-test
While feeding paper using the Feed button
- While initializing after turning on the power
Roll paper cover open while not printing
Waiting for the self-test to continue
F
Waiting for a Macro execution to run
Waiting to print a status sheet
F
No paper
N
- Automatically Recoverable Errors
Recoverable Errors
- Unrecoverable Errors
CAUTION:
Turn off the power immediately when an unrecoverable error occurs.
If the same error occurs again even after turning the power back on, contact
qualified service personnel.
Updating firmware
O
While forced updating firmware mode is on
F
- During network startup when the power is turned on
During power off
O
NOTE:
The printer enters this status while processing the power off command. It is
recommended to use this method when you need to save information on
the printer's operating status if the power is cut without using the power
switch.
Chapter 1 Product Overview
O: OFF N: ON F: Flashing
Printer Status
1
19