Table of Contents
Advertisement
1-4. Constituent Devices of Routing Switcher System
The routing switcher system consists of the following four types of equipment.
. . . . . Routing switcher controller (HKSP-R80)
It controls the signal switching for the routing switcher in accordance with the commands from the host
controller (such as host computer) and remote control panel.
. . . . . Routing switcher (IXS, HDS, DVS, BVS series)
The switcher with a built-in controller and the one without it are available.
The built-in controller type switches signals according to the command from the controller (such as
host computer) and the remote control panel. The routing switcher without a built-in controller (such as
a secondary station) switches signals by following the commands from the controller. Varied switchers
are available for different types of signals such as serial digital video, digital audio, time code, RS-
422A, etc.
. . . . . Routing switcher control unit (Remote control panel) (BKS-R series)
It is used to switch signals and to display the name of the selected signal. It is sometimes simply called
as "remote control panel".
. . . . . Personal computer
A personal computer is required in order to establish the various setups that are necessary for configur-
ing and running the routing switcher system using a terminal emulator. The setup data are backed up
and restored with the BZR-20 that is supplied with the IXS-6600/IXS-6700, HKSP-R80 and HDS-
X5800.
A personal computer having the following specifications is recommended for use with the routing
switcher system.
. IBM PC/AT compatible personal computer
. Windows XP (English version or Japanese version)
. RS-232C port or Ethernet is installed.
. Terminal emulator (VT100 or higher) is installed.
. The codes of F1 to F5 are already set.
n
For the code setting procedure, refer to Section 2-2.
. BZR-20 (V2.11 or higher) is installed.
n
For the BZR-20 installation procedure, refer to the Installation Manual in the CD-ROM supplied with
the IXS-6600/IXS-6700, HKSP-R80 and HDS-X5800 .
. Microsoft Excel is installed.
. DirectX (V6.1a or higher) is installed.
. BZR-2000 (V1.70 or higher) is installed when using GUI for setup.
BKS-R3219A/R1617A I&SSM
.
1-3
Advertisement
Table of Contents
