Table of Contents
Advertisement
Internal Process After TAKE Button Pressing :
When pressing the TAKE button after selecting a source/
phantom the following internal process is made.
By pressing the source selection button, TAKE is immedi-
ately performed on BKS-R3219A/BKS-R1617A.
TAKE button is pressed
Checks if the selected name exists on the phantom table
If it exists
Check if the data set in the
phantom table is the global
phantom
YES
Output the global
Select the source/destination
phantom number
set in the phantom table
Check if the secret or protect is set to the selected
source and destination
Omit the source and destination
to which the secret or protect is
set
Check the level setting of the
remaining source and destination
for each name.
If the setting is 0, the level is
transferred from the destination
table
Output the signal switching request
3-10
If it does not exist
NO
If neither
If secret
secret nor
or protect
protect is
is set
set
Process nothing
L : COPY TABLE DATA
Purpose
This menu is used to copy the table data of the specified remote
control unit. This applies to the remote control unit as follow.
Setting Procedure
1. Select menu item of the secondary station [L]. This
item can be selected from both the menu and another
setting screen.
2. As the message "Station Number?" will be displayed on the
screen, input the station number of the unit to be copied.
Select the table name to be copied, from A, P, C, B
and D, using the alphabet keys.
3. When [Enter] is pressed, the table data will be copied,
and the screen will return to the setting screen.
SONY ROUTING SYSTEM SETUP MENU
A:Copy All tables from
B:Copy PANEL table from
C:Copy ROUTE table from
D:Copy Available SOURCE/Destination table from
P:Copy PHANTOM table from
Inputs A,B,C,D,P,0-9 Selected = A
Station Number ?
Ctrl-E:MENU Ctrl-D:RETURN
Example of Setting Screen
Selected = A
All the table data are copied.
Selected = P
Data set at the menu item [SET PHAN-
TOM TABLE] are copied.
Selected = C
Data set at the menu item [SET ROUTE]
are copied.
Selected = B
Data set at the menu item [SET PANEL
TABLE] are copied.
Selected = D
Data set at the menu item [SET AVAIL-
ABLE DESTINATION] are copied.
n
The copy function of BKS-R3219A/R1617A guarantees
upper compatibility only.
To return to the menu screen of the secondary
station
Press [Ctrl] _ [E].
To return to the menu screen of the primary station
Press [Ctrl] _ [D].
BKS-R3219A V2.23 STATION NUMBER 6
BKS-R3219A/R1617A I&SSM
Advertisement
Table of Contents
