Table of Contents
Advertisement
Advanced
Settings
At the bottom right hand corner of the 'Plan' page there is a settings option.
In this you can:
Rename the Dosing Pump.
In settings tap on 'Name' and the settings page will open. Enter the new name and tap 'Save' in the
top right corner.
Update firmware.
If the firmware on the device is up to date 'No Update' will be displayed. If updates are available tap
on the update and follow the instructions on screen. Do not close the app or power down the unit
during this process.
Time setting
The unit should automatically sync to the correct time when setup and keep the correct time during a
power outage. If the time is incorrect and needs to be adjusted tap on 'Time Setting' and select 'Time
Sync'. It is normal for the 'Firmware time' to lag behind the 'App Time' by 1-5 seconds due to the time
taken to process data between the app and the device.
Flow Calibration
Used to calibrate the unit to ensure accurate dosing. Please see Calibration in this manual.
15
Version 1.0
Advertisement
Table of Contents
