D-D Aqua-Pro Reef Systemised Aquarium Please read the following installation instructions carefully before starting to assemble and run your aquarium. If correctly installed, your new aquarium should give you years of pleasure in this fantastic and enthralling hobby. STEP 1. POSITIONING THE AQUARIUM When positioning the tank it is important to have enough people to safely move the aquarium.
Page 3
Metal Framed Cabinet Take the lower part of the main overflow pipe, which is fitted with a gate valve, ensure the rubber o-ring is in place. The metal frame cabinet comes with 6-8 adjustable feet, depending on model. Offer up the female threaded end of the pipe to the male thread coming down through the weir.
Page 4
STEP 4. FILLING & TESTING THE AQUARIUM form that will dampen some noise. It is also possible that minor adjustments will need to be made to the Initial testing of the pipework gate valve over the first few days to achieve quiet Before filling the aquarium, it is best to test that the running as the tank and return pump stabilise.
Page 5
All sumps are ClariSea ready so that a ClariSea fleece filter will just drop in and there is a filter sock option which can be specified at the time of ordering. Aqua-Pro 1800 Pipework Layout AQUA-PRO REEF 1200 SUMP LAYOUT Return pump Skimmer /...
Page 6
Height Left to right Front to back Quick release The cabinet doors can be height Adjustment of the screw as shown The door can be brought The hinges have a quick release adjusted marginally with the will enable left and right alignment forward by loosening the screw mechanism.
Need help?
Do you have a question about the Aqua-Pro Reef 1200 and is the answer not in the manual?
Questions and answers