Table of Contents
Advertisement
Product Layout
Indicator
Status indicator
Blue
Power indicator
Red
Note: When the blue status indicator is lit or flashing the red power indicator is off.
Installation
Positioning the pump
The dosing pump is a self-priming pump. When there is big difference between the inlet and the
outlet height, siphoning may occur. In order to avoid siphoning, the dosing pump should be placed in
a position to ensure that the height difference between the inlet and the outlet is within 0.5m.
The inlet tube should be as short as possible, and the outlet tube should not be submerged.
A length of clear tube is provided with the unit. Coloured hoses (Part code DDCT01) are available as
an optional extra.
Please carefully check that the inlet and outlet tube connections are correct on the pump head and
that the hoses are pushed fully onto the hose connection pipe collets before installation.
The pump should be secured into place or installed in a stable location not above open water or very
humid environments. A specially designed mounting bracket is available as an optional extra for
secure fixing (Part code DDP1BKPRO).
Version 1.0
1.Inlet
2.Outlet
3. Status / Power indicator
4. Pump head (Counter clockwise rotation)
5. Reset button
Status
On
Off
Fast Flashing
Slow Flashing
(Will also show when unit is initially powered up)
On
Off
Description
Connected to the cloud via router
Disconnected from the router
Pump is in configuration mode
Disconnected from the cloud
Unit is powered up normally
No power to unit
3
Advertisement
Table of Contents
