Table of Contents
Advertisement
If you want to stop the manual dose tap the 'Start' button (that will now be displaying 'Stop') again to
cancel the operation. There is a lag when pressing the stop button so this should not be used as a
method to stop the pump at an exact point. For accurate additions program the amount required and
let the pump complete its program.
Calibration
When the dosing pump is initially set up, the pump head has been replaced, or if the unit has been in
service for a period of time it is worth calibrating pump heads to ensure accuracy.
To calibrate open the app and select the device you want to calibrate from the available devices list.
Tap the 'Settings' icon located at the bottom right of the 'Plan' page.
Select 'Flow Calibration' from the list.
Make sure the inlet hose for the pump is submerged and that the outlet hose is directed into a
suitable collection container.
13
Version 1.0
Advertisement
Table of Contents
