Table of Contents
Advertisement
S1012_GR-12L_DE_V1sh
CH5 FUNCTION
• SERVO
Port "5" is suitable for operating RC components and for receiver
updates.
• SENSOR
Port 5 is suitable for the operation of telemetry sensors.
• BATT V
After switching as described before, a DC voltage off max. 25,5 V
can be displayed instead of the receiver voltage. This way it is
possible to monitor the main battery voltage without using exter-
nal sensors. The ESCs S3082 and S3083 have this switch already
included.
50 mm
Attention
Never connect a power supply with an output voltage higher than
8,4 V directly to a connection port of the receiver! The receiver and
all connected devices would be immediately destroyed.
CH6 FUNCTION
• SERVO
The connection 5 is suitable for the operation of RC components.
• SUMD
At connection 5, a digital sum signal is provided.
• SBUS
Digital sum signal in SBUS format.
• SP2018
T
e h
o p
t r
6
s i
u s
t i
b a
e l
2048 signal can handle. e.g. 48377.
RSSI CH
As soon as "SUMD", "SBUS" or "SP2048" is selected instead of
"SERVO" in the "CH6 FUNCTION" line described above, changing the
value field of this option from "OFF" to "CHxx" will change the num-
ber of channels contained in the selected sum signal. At the same
time, the servo signal of the highest numbered channel is replaced
by an RSSI signal.
100 mm
22k
o f
c r
n o
e n
i t c
g n
f a
g i l
t h
o c
–
+
t n
o r
t , l
e h
p S
k e
. r t
13 / 20
Advertisement
Table of Contents
