Assembly Procedure
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is
damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Assemble Frame Components
1. Install screws, washers, and locknuts securing the lower cross brace to the tower frame using an 8mm Allen wrench
and 17mm wrench.
2. Install hole plugs to the tower frame.
3. Install screws and washers securing the upper cross brace to the tower frame using an 8mm Allen wrench.
Item
1
2
3
4
Nut, M10 x 1.5, Hex Nylock
5
6
Item
1
2
3
4
Page 12 of 35
Description
Lower Cross Brace
Tower Frame
Washer, Flat 3/8"
Screw, M10 x 1.5, 110mm
Hole Plug, ½"
Hand tighten hardware.
Description
Upper Cross Brace
Tower Frame
Washer, Flat 3/8"
Screw, M10 x 1.5, 25mm
Hand tighten hardware.
Qty.
1
1
4
2
2
2
Qty.
1
1
4
4