Life Fitness Axiom OP-MP Assembly Instructions Manual page 25

3. Install screws and washers securing the spacers and work arm assembly to the work arm linkage assembly using an
8mm Allen wrench.
Install Seat Assembly
1. Install screws and washers securing the rear seat linkage assembly to the main frame assembly using an 8mm Allen
wrench.
2. Install screws and washers securing the front seat linkage assembly to the main frame assembly using an 8mm
Allen wrench.
3. Slide pivot shaft out from the rear seat linkage assembly.
Item
1
2 Work Arm Linkage Assembly
3
4
5
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Item
1 Rear Seat Linkage Assembly
2
3
4
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Item
1 Front Seat Linkage Assembly
2
3
4
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Page 23 of 35
Description
Work Arm Assembly
Spacer, .425"
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Description
Main Frame Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Description
Main Frame Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Qty.
1
1
2
2
2
Qty.
1
1
2
2
Qty.
1
1
2
2