Life Fitness Axiom OP-MP Assembly Instructions Manual page 26

4. Align seat assembly with the front and rear seat linkage assemblies. Slide pivot shaft through the seat assembly
and rear seat linkage assembly.
5. Install screws and washers securing the seat assembly to the front seat linkage assembly using an 8mm Allen
wrench.
Install Seat Back Assembly
1. Install screws and washers securing the seat back linkage assembly to the main frame assembly using an 8mm
Allen wrench.
2. Pull detent pin out on the rear seat linkage assembly and slide the seat back assembly down into position.
3. Install screws and washers securing the seat back assembly to the seat back linkage assembly and seat assembly
using an 8mm Allen wrench.
Item
1
2 Front Seat Linkage Assembly
3 Rear Seat Linkage Assembly
4
5
6
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Item
1 Seat Back Linkage Assembly
2
3
4
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Item
1
2 Seat Back Linkage Assembly
3
4
5
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Page 24 of 35
Description
Seat Assembly
Pivot Shaft
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Description
Main Frame Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Description
Seat Back Assembly
Seat Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Qty.
1
1
1
1
2
2
Qty.
1
1
2
2
Qty.
1
1
1
4
4