Ricoh Ri 1000 Operator Training page 104

Printing with Foils
Steps:
4. Place the foil on the desired printed area, color side up.
It is not required to foil the entire image. You can cut the foil to only be

placed the part of the image you want to have the metallic foil effect.
The foil will transfer off the sheet and onto the image.

5. Place the heat press paper on top and press the garment.
Standard dark shirt heat press settings are 330 F for 90 seconds.

6. Remove the garment and lay flat.
Lay flat for a least 2 minutes to ensure it has cooled down.

A tip to getting foil to stick to the ink, is to rub the foil sheet with another

shirt until you see the imprint on the foil.
7. Quickly peel off the foil.
05/11/2020 Version: [###] Classification: Internal Owner: [Insert name] 104