Ricoh Ri 1000 Operator Training page 18

Heat Press Equipment
All garment inks are required to reach a certain
temperature and time to be properly cured. If
this temperature or time is not properly adjusted
on your heat press, you risk the possibility of
the shirt washing out during the wash
cycle. Keep Heat Press at least 10 feet away
from printer.
Heat Press Setting: 330˚F (165˚C) for 90

seconds.
All prints can be run at this longer/colder setting

if you are alternating from light to dark.
Pressure – Pressure should be set to a Medium

to Medium/High settings. If there is not enough
pressure, the ink will not cure and will wash out.
Use 40-50 PSI (6 boxes on the GeoKnight).
05/11/2020 Version: [###] Classification: Internal Owner: [Insert name] 18