Table of Contents
Advertisement
Chapter 3 - System Requirements and Specifications
3.3
MB-10 Servo Kit Cable Kits
Amp-to-Amp Cable Kits
MB-10 amps may be mounted adjacent to each other or up to 4.5 m apart. The cable kit for
connecting two MB-10 amps contains three cables: an IEEE-1394 (FireWire
power cable, and a 24 VDC power cable. The available cable lengths and the kit part
numbers are listed below.
Amp-to-Motor Cable Kits
The MB-10 Servo Kit motors may be mounted up to 4 m away from the MB-10 amp. The
extension cable kit for connecting an MB-10 amp to a motor contains two cables: a motor
cable and an encoder cable. The available cable lengths and the kit part numbers are listed
below.
32
Adept MotionBlox-10 Servo Kit Installation Guide, Rev. B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 3-5. MB-10-to-MB-10 Amp Cable Kit Option
Cable Length
0.27 M
0.8 M
1.1 M
1.4 M
1.8 M
2.2 M
2.6 M
3.0 M
4.5 M
Kit Part Number
90410-10003
90410-10008
90410-10011
90410-10014
90410-10018
90410-10022
90410-10026
90410-10030
90410-10045
) cable, an AC
™
Advertisement
Table of Contents
