Table of Contents
Advertisement
Chapter 2 - Servo Kit Installation
Installing the MB-10 T-Bracket Cover
Secure the strain relief clamps on both sides of the MB-10 T-bracket. Then install the cover
on the MB-10 T-bracket. See
cables.
MB-10 T-Bracket Cover
2.7
Power Distribution Unit
The PDU3 is a power distribution and safety device that provides switched AC power to
the MB-10(s) for E-Stop functionality. The PDU3 also supplies DC power to the MB-10
circuits for basic operation.
The PDU3 performs the following functions with regard to the Servo Kit:
1. Supplies switched AC power to the MB-10.
2. Provides AC power filtering and surge protection.
3. Supplies 24 VDC power to the MB-10 and optional IO Blox.
4. Provides CAT-3 E-Stop functionality.
NOTE: See the
information on the PDU3.
See the system cable diagram in
PDU3.
18
Adept MotionBlox-10 Servo Kit Installation Guide, Rev. B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure
2-8. This completes the process of attaching the MB-10
Figure 2-8. T-Bracket Cover on the MB-10
Adept Python Linear Modules User's Guide
Section 2.8 on page 20
for more
for details on connecting the
Advertisement
Table of Contents
