Ipv6 - Auto Configuration (Slaac/Dhcpv6) - D-Link COVR-1900 User Manual

Section 3 - Configuration
Select Auto Configuration if your ISP assigns your IPv6 address when your
router requests one from the ISP's server. Some ISPs require you to adjust
settings on your side before your router can connect to the IPv6 Internet.
Click Save at any time to save the changes you have made on this page.
Select either Obtain DNS server address automatically or
DNS Type
Use the following DNS address.
If you selected Use the following DNS address, enter the
Primary DNS Server
primary DNS server address.
If you selected Use the following DNS address, enter the
Secondary DNS Server
secondary DNS server address.
LAN IPv6 Address Settings
Enable or disable prefix delegation services.
Enable DHCP-PD
Displays the router's LAN link-local address.
LAN IPv6 Link-Local
Address
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
Enter a valid LAN IPv6 address.
LAN IPv6 Address
Displays the router's LAN link-local address.
LAN IPv6 Link-Local
Address
D-Link COVR-1900 User Manual
IPv6 - Auto Configuration (SLAAC/DHCPv6)
IPv6 DNS Settings
44