Ipv4 - Dynamic Ip (Dhcp) - D-Link COVR-1900 User Manual

Section 3 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select
this option if your ISP does not specify an IP address to use. Click Save at any time to save the changes you have made on this
page.
The host name is optional but may be required by some ISPs.
Host Name
Leave it blank if you are not sure.
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS Server
This address is usually obtained automatically from your ISP.
Enter the secondary DNS server IP address assigned by your ISP.
Secondary DNS Server
This address is usually obtained automatically from your ISP.
Maximum Transmission Unit - you may need to change the
MTU
MTU for optimal performance with your ISP.
The default MAC address is set to the Internet port's physical
MAC Address Clone
interface MAC address on the router. You can use the drop-
down menu to replace the Internet port's MAC address with
the MAC address of a connected client.
D-Link COVR-1900 User Manual

IPv4 - Dynamic IP (DHCP)

Advanced Settings...
30