D-Link COVR-1900 User Manual page 62

Section 3 - Configuration
2.4GHz / 5GHz - Advanced Settings...
Choose None, WPA/WPA2-Personal (recommended) or
Security Mode
WPA3-Personal.
Select the desired wireless networking standards to use.
802.11 Mode (2.4GHz)
The available options for the 2.4 GHz wireless network are
Mixed 802.11b/g/n, Mixed 802.11g/n, or 802.11n only.
Select the desired wireless networking standards to use.
802.11 Mode (5GHz)
The available options for the 5 GHz wireless network are
Mixed 802.11a/n/ac, Mixed 802.11n/ac, Mixed 802.11a/n,
802.11ac only, Mixed 802.11a only, or 802.11n only.
Select the desired channel. The default is Auto (recommended).
Wi-Fi Channel
Select the desired wireless transmission power.
Transmission Power
Select Auto 20/40 if you are using both 802.11n and non-
Channel Width
802.11n devices, or select 20 MHz if you are not using any
(2.4GHz)
802.11n devices.
Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and
Channel Width (5GHz)
802.11a devices, select Auto 20/40 if you are using 802.11n
and 802.11a devices, or select 20 MHz if you are using 802.11a
devices.
Enable or disable HT20/40 Coexistence.
HT20/40 Coexistence
(2.4GHz)
The default setting is Visible. Select Invisible if you do not
Visibility Status
want to broadcast the SSID of your wireless network.
Use the drop-down menu to select the time schedule that
Schedule
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 83 for more information.
D-Link COVR-1900 User Manual 58