D-Link COVR-1900 User Manual page 49

Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable or disable the Automatic IPv6 Address Assignment
Enable Automatic
feature.
IPv6 Address
Assignment
If Enable DHCP-PD is enabled in the previous LAN IPv6 Address Settings:
Enable or disable DHCP-PD for other IPv6 routers connected
Enable Automatic
to the LAN interface.
DHCP-PD in LAN
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
Autoconfiguration
Type DHCPv6.
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Enter the router advertisement lifetime (in minutes).
Router
Advertisement
Lifetime
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
Enter the starting IPv6 address for the DHCP server's IPv6
IPv6 Address
assignment.
Range (Start)
Enter the ending IPv6 address for the DHCP server's IPv6
IPv6 Address
assignment.
Range (End)
D-Link COVR-1900 User Manual 45