D-Link COVR-1900 User Manual page 77

Section 3 - Configuration
If you clicked on Edit or Add Rule, the following options will appear:
Enter a name for the rule.
Name
Enter the IP address of the computer on your local network
Local IP
that you want to allow the incoming service to. Alternatively,
select the device from the drop-down menu.
Enter the TCP ports that you want to open. You can enter a
TCP Port
single port or a range of ports. Separate ports with a comma
(for example: 24,1009,3000-4000).
Enter the UDP ports that you want to open. You can enter a
UDP Port
single port or a range of ports. Separate ports with a comma
(for example: 24,1009,3000-4000).
Use the drop-down menu to select the time schedule that
Schedule
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 83 for more information.
D-Link COVR-1900 User Manual 73