D-Link COVR-1900 User Manual page 75

Section 3 - Configuration
If you clicked on Edit or Add Rule, the following options will appear:
Enter a name for the rule.
Name
Enter the source IP address range that the rule will apply to.
Source IP Address
Using the drop-down menu, specify whether it is a WAN or
Range
LAN IP address.
Enter the destination IP address range that the rule will apply
Destination IP Address
to. Using the drop-down menu, specify whether it is a WAN
Range
or LAN IP address.
Select the protocol of the traffic to allow or deny (Any, TCP,
Protocol & Port Range
or UDP) and then enter the range of ports that the rule will
apply to.
Use the drop-down menu to select the time schedule that
Schedule
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 83 for more information.
D-Link COVR-1900 User Manual 71