Table of Contents
Advertisement
Section 3 - Configuration
Select Auto Configuration if your ISP assigns your IPv6 address when your
router requests one from the ISP's server. Some ISPs require you to adjust
settings on your side before your router can connect to the IPv6 Internet.
Click Save at any time to save the changes you have made on this page.
DNS Type
Select either Obtain DNS server address automatically or
Use the following DNS address.
Primary DNS Server
If you selected Use the following DNS address, enter the
primary DNS server address.
Secondary DNS Server
If you selected Use the following DNS address, enter the
secondary DNS server address.
Enable DHCP-PD
Enable or disable prefix delegation services.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address
Enter a valid LAN IPv6 address.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address
D-Link DIR-1950 User Manual
IPv6 - Auto Configuration (SLAAC/DHCPv6)
IPv6 DNS Settings
LAN IPv6 Address Settings
43
Advertisement
Table of Contents
