Ipv6 - Auto Configuration (Slaac/Dhcpv6) - D-Link IRX1860A1 User Manual

Section 3 - Configuration
Select Auto Configuration if your ISP assigns your IPv6 address when your
router requests one from the ISP's server. Some ISPs require you to adjust
settings on your side before your router can connect to the IPv6 Internet.
Click Save at any time to save the changes you have made on this page.
DNS Type Select either Obtain DNS server address automatically or
Use the following DNS address.
Primary DNS Server If you selected Use the following DNS address, enter the
primary DNS server address.
Secondary DNS Server If you selected Use the following DNS address, enter the
secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD Enable or disable prefix delegation services.
LAN IPv6 Link-Local Displays the router's LAN link-local address.
Address
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address Enter a valid LAN IPv6 address.
LAN IPv6 Link-Local Displays the router's LAN link-local address.
Address
D-Link DIR-X1860 User Manual
IPv6 - Auto Configuration (SLAAC/DHCPv6)
IPv6 DNS Settings
44