Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-10
Heat sink descriptions and part numbers
Description
Heat sink for use in models with UMA graphics memory
Heat sink for use in models with discrete graphics memory
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the heat sink:
1.
UMA models: In the order indicated on the heat sink, remove the three Phillips M2.0 × 2.0 screws (1)
that secure the heat sink to the system board.
2.
Remove the heat sink (2).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
29).
27).
Component replacement procedures
Spare part number
M08944-001
M16352-001
27).
39