Table of Contents
Advertisement
DISPLay:MONitor:CARD?
DISPLay:MONitor[:STATe]
Parameters
Comments
Chapter 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DISPlay:MONitor:CARD?
command and returns the module in a switchbox to be monitored.
DISPlay:MONitor[:STATe] <mode>
monitor mode is on, the RS-232 terminal display presents an array of values
indicating the open/close state of every switch on the module. This display is
dynamically updated each time a switch is opened or closed.
Name
<mode>
Monitoring Switchbox Channels:
DISPlay:MONitor:STATe 1 turns the monitor mode ON to show the channel state of
the selected module. DISPlay:MONitor:STATe OFF or DISPlay:MONitor:STATe 0
turns the channel monitor OFF.
Typing in another command on the terminal will cause the DISPlay:MONitor[:STATe]
to automatically be set to OFF (0).
Note
Use of the OFF parameter is useful only if the command is issued across
the GPIB interface.
Selecting the Module to be Monitored:
DISPlay:MONitor:CARD <number> AUTO to select the module.
queries the setting of the DISPlay:MONitor:CARD
turns the monitor mode ON or OFF. When
Type
Range of Values
boolean
ON | OFF | 1 | 0
DISPlay:MONitor:STATe ON or
Use
Switchbox Command Reference 73
Default Value
OFF | 0
Advertisement
Table of Contents
