Summary of Contents for Agilent Technologies E8257DS02
Page 1
Agilent E8257DS02-S15 Source Modules User Guide http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html The E8257DS02, S03, S05, S06, S08, S10, S12, and S15 are Millimeter-wave Source Modules that are manufactured by Oleson Microwave Labs (OML) and is provided as an ordering convenience by Agilent Technologies. This product can be ordered directly from OML. For additional Millimeter-wave Source Modules information go to the Agilent website at http://www.agilent.com/find...
Page 3
FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of Software is subject to Agilent Technologies’ standard commercial license terms, and non-DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987).
Page 4
• Characteristic Performance describes performance parameter that the product is expected to meet before it leaves the factory, but is not verified in the field and is not covered by the product warranty. A characteristic includes the same guard bands as a specification. This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
Page 5
This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
Shipping Your Product to Agilent for Service or Repair ......... . . 12 Contents-1 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
Page 7
Contents Contents-2 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
E8257DS02-S15 Introduction The E8257DS02, S03, S05, S06, S08, S10, S12, and S15 are Millimeter-wave Source Modules that are manufactured by Oleson Microwave Labs (OML) and is provided as an ordering convenience by Agilent Technologies. This product can be ordered directly from OML. For additional Millimeter-wave Source Modules information go to the Agilent website at http://www.agilent.com/find...
≤ − In-band mixing products. Typically 15 dBc in the lower 10% of WR-15, WR12, or WR10 waveguide band. 7. Available as Option A25. Not available in the E8257DS02 module. 8. RF Output port flange configuration per MIL-F-3922-67B-xx. User’s Guide E8251-90283...
Page 12
The following OML millimeter-wave source module model part numbers corresponding with the Agilent model part numbers. Table 4 OML and Agilent Model Numbers Agilent Model Number Model Number S15MS-AG E8257DS15 S12MS-AG E8257DS12 S10MS-AG E8257DS10 S08MS-AG E8257DS08 S06MS-AG E8257DS06 S05MS-AG E8257DS05 S03MS-AG E8257DS03 S02MS-AG E8257DS02 User’s Guide E8251-90283 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
A copy of the Declaration of Conformity is available upon request, or a copy is available on the Agilent Technologies web site at http://regulations.corporate.agilent.com/DoC/search.htm Statement of Compliance This instrument has been designed and tested in accordance with CAN/CSA 22.2 No. 61010-1-04, UL Std No. 61010-1 (2nd Edition). User’s Guide E8251-90283 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
4 °C for every 100 watts dissipated in the cabinet. If the total power dissipated in the cabinet is greater than 800 watts, forced convection must be used. User’s Guide E8251-90283 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
Remove the power cord to the instrument. To clean the connectors use alcohol in a well ventilated area. Allow all residual alcohol moisture to evaporate, and fumes to dissipate prior to energizing the instrument. WARNING “Agilent Technologies E8257DS02 - S15” To prevent electrical shock, disconnect the from mains electrical supply before cleaning.
2. While wearing a grounded wrist strap, grasp the outer shell of the cable connector. 3. Connect the other end of the cable to the test port and remove the short from the cable. Figure 3 ESD Protection Setup User’s Guide E8251-90283 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
Forty years is the expected useful life of the product. This symbol on all primary and secondary packaging indicates compliance to China standard GB 18455-2001. South Korean Certification (KC) mark; includes the marking's identifier code which follows this format: MSIP-REM-YYY-ZZZZZZZZZZZZZZ. User’s Guide E8251-90283 This Manual:http://www.manuallib.com/agilent/e8257ds02-s15-source-modules-user-guide.html...
Regulatory Information Battery Collection Do not throw batteries away but collect as small chemical waste, or in accordance with your country’s requirements. You may return the battery to Agilent Technologies for disposal. Refer to “Contacting Agilent” on page 12 for assistance.
Shipping Your Product to Agilent for Service or Repair IMPORTANT Agilent Technologies reserves the right to reformat or replace the internal hard disk drive in your analyzer as part of its repair. This will erase all user information stored on the hard disk.