Table of Contents
Advertisement
STATus:OPERation:CONDition?
STATus:OPERation:ENABle
Parameters
Comments
Example
STATus:OPERation:ENABle?
Comments
Example
Chapter 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
STATus:OPERation:CONDition?
Operation Status Group. The state represents conditions which are part of the
instrument's operation. The "SWITCH" driver does not set bit 8 in this register (see
STATus:OPERation[:EVENt]?).
STATus:OPERation:ENABle <unmask>
recorded in the Event Register to send a summary bit to the Status Byte Register (bit
7). For multiplexer modules, when bit 8 in the Operation Status Register is set to 1
and that bit is enabled by STATus:OPERation:ENABle, bit 7 in the Status Register
is set to 1.
Name
<unmask>
Setting Bit 7 of the Status Byte Register:
of the Status Byte Register to 1 after bit 8 of the Operation Status Register is set to 1.
[ROUTe:]SCAN
Related Commands:
Enabling Operation Status Register Bit 8
67$7 23(5 (1$%
STATus:OPERation:ENABle?
Status Group) are unmasked.
Returns a decimal weighted value from 0 to 65,535 indicating which
Output Format:
bits are set to true.
Maximum Value Returned:
STAT:OPER:ENAB <unmask> command. However, the maximum decimal
weighted value used in this module is 256 (bit 8 set to true).
Query the Operation Status Enable Register
67$7 23(5 (1$%"
returns the state of the Condition Register in the
sets an enable mask to allow events
Type
Range of Values
numeric
0 through 65,535
STATus:OPERation:ENABle 256 sets bit 7
Enable bit 8 of the Operation Status
Register to be reported to bit 7 (OPR) in the
Status Byte Register.
returns which bits in the Event Register (Operation
The value returned is the value set by the
Query the Operation Status Enable
Register
Switchbox Command Reference 89
Default Value
N/A
Advertisement
Table of Contents
