Output; Output:ecltrgn[:State] - Agilent Technologies E1476A User Manual

OUTPut

Subsystem Syntax

OUTPut:ECLTrgn[:STATe]

Parameters
Comments
OUTPut:ECLTrgn[:STATe]?
Chapter 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The OUTPut command subsystem enables one trigger line of the E1406 Command
Module. It also can disable the active line.
OUTPut
:ECLTrgn (:ECLTrg0 or :ECLTrg1)
[:STATe] <mode>
[:STATe]?
[:EXTernal
[:STATe] <mode>
[:STATe]?
:TTLTrgn (:TTLTrg0 through :TTLTrg7
[:STATe] <mode>
[:STATe]?
OUTPut:ECLTrgn[:STATe] <mode>
trigger bus pulse on the VXI bus line specified by n. There are two ECL trigger lines
on the VXI bus allowing valid values for n to be 0 and 1. "mode" enables (ON or 1)
or disables (OFF or 0) the specified ECL Trigger bus line.
Name
n numeric
<mode> boolean
When OUTPut:ECLTrgn:STATe ON is set, a trigger pulse occurs each time a
channel is closed during a scan.
OUTPut:ECLTrgn[:STATe]?
n. A "1" is returned if the line is enabled; a "0" is returned if it is disabled. Valid values
for n are 0 and 1.
enables (ON or 1) or disables (OFF or 0) the ECL
Type Range of Values
0 or 1
ON | OFF | 1 | 0
queries the state of the ECL trigger bus line specified by
Switchbox Command Reference 77
Default Value
N/A
OFF | 0