10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
This chapter explains the procedures from module settings to parameter settings,
programming, and finally operation check using a system configuration example.
For more detailed information on remote device stations, see the Remote Device
Station User's Manual.
10.1 Configuring a System
As shown below, a system with one connected remote I/O station is used as an
example.
10 - 1
Master
station
Q61P-A1
Q06HCPU
QJ61BT11 QX41 QY41P QX41
Terminal
resistor
QY41P
Occupies
2 stations
Remote device station
(station number 1)
AJ65BT-64AD
A-D conversion module
Terminal
resistor
MELSEC-Q
10
10 - 1