How To Check The Function Version And Serial No; About Version 1.10 - Mitsubishi MELSEC-Q Series User Manual

2 SYSTEM CONFIGURATION

2.2.4 How to check the function version and serial No.

2.2.5 About Version 1.10

2 - 10
The following describes how to check the function version and serial No..
(1) How to check the function version and serial No. of the QJ61BT11
(a) Checking the "SERIAL column of the rating plate" on the module side
(b) See Section 13.4 for how to check the function version with GX Developer.
Version 1.10 modules have a uniform station-to-station cable length of 20 cm or more
by improving the restrictions on the conventional station-to-station cable length.
In contrast, the conventional modules are defined as Version 1.00.
See Section 3.1.2 for the maximum overall cable distance of Version 1.10.
In order to make the station-to-station cable length uniformly 20 cm or more, the
following conditions are required:
1) All the modules that make up the CC-Link system must be of Version 1.10.
2) All the data link cables must be CC-Link dedicated cables conforming to Version 1.10.
POINT
The specifications for Version 1.00 should be used for the maximum cable overall
distance and station-to-station cable length if a system contains modules and
cables of both Version 1.00 and Version 1.10.
See Section 3.1.1 for the maximum overall cable distance and station-to-station
cable length of Version 1.00.
(1) How to check if the module is of Version 1.10
Modules of Version 1.10 have the logo "CC-Link" on the "rating plate."
MELSEC-Q
Serial No. (first 5 digits)
Function version
2 - 10