Applicable System; Applicable Modules And Number Of Cpus That Can Be Mounted - Mitsubishi MELSEC-Q Series User Manual

2 SYSTEM CONFIGURATION

2.2 Applicable System

Applicable PLC CPUs and notes on the system configuration are described below.

2.2.1 Applicable modules and number of CPUs that can be mounted

(1) Applicable modules and number of CPUs that can be mounted
2 - 2
The CPU modules and network modules (for remote I/O station) to which the
QJ61BT11 can be installed and number of modules that can be installed are
listed in the table below.
(a) When performing the parameter setting with the GX Developer
Applicable module
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
CPU
Q02HCPU
module
Q06HCPU
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
Network QJ72LP25-25
module QJ72BR15
(b) When performing the parameter setting with the dedicated instructions.
Number of CPUs that can be mounted (
Applicable module
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
CPU
Q02HCPU
module Q06HCPU
Q12HCPU
Q25HCPU
Q12PHCPU
Q25PHCPU
1 See User's Manual (Function Explanation, Program Fundamentals) for the CPU
module to use.
2 When using Q00J/Q00/Q01CPU, use the QJ61BT11 which function version is B or
later.
3 When using the QJ61BT11 as the local station, perform the parameter setting with
the GX Developer.
When the Q02/Q02H/Q06H/Q12H/Q25H/Q12PH/Q25PHCPU is used, the maximum
number of CPUs that can be mounted is 4 where the QJ61BT11 is used as the local
station.
When the Q00J/Q00/Q01CPU is used, the maximum number of CPUs that can be
mounted is 2 where the QJ61BT11 is used as the local station.
Number of CPUs that can be mounted
Maximum 2
Maximum 4
Maximum 4
Maximum 4
Maximum 2
Maximum 64
Maximum 64
MELSEC-Q
2
Remark
1 2
( ) ( )
It can be
mounted only
with the Q
1
mode. ( )
1
( )
—
3
)
Remark
1 2 3
( ) ( ) ( )
It can be
mounted only
with the Q
mode.
1 3
( ) ( )
1 3
( ) ( )
2 - 2