Command Set - RACOM MG101 User Manual

4.3.1

Command Set

General Restrictions:
•
When sending parameters within HTTP GET requests, dots (.) within variables must be replaced by
colons (:). Example: The key name user.admin.password results in user:admin:password
•
Authentication is required for all commands exept GET /cli.php?status,[parameters]
HTTP Request
GET /cli.php?status,[parameters]
GET /cli.php?get,[parameters]
GET /cli.php?set,[parameters]
GET /cli.php?sw-update,path=<value>
GET /cli.php?reboot
GET /login.php?usr=<user>,pwd=<password>
GET /logout.php
GET /download.php?file=<fileName>
POST /upload.php
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
Description
Takes the same parameters as the CLI
Takes the same parameters as the CLI
Takes the same parameters as the CLI
Starts a local software update from a TFTP server
Restarts the MG101/102
Login to the HTTP Service Interface with supplied creden-
tials
Logout from the HTTP Service Interface
Download a file
•
Debug log: file=debuglog
•
Boot log: file=bootlog
Takes a new configuration file as user-config.cfg or a
user-config.zip. The content of the file must be the same
as provided for the Web Manager.
99 / 107