Table of Contents
Advertisement
3.3
Configuration via Command Line Interface (CLI)
The command line interface is accessible after successful login to MG101/102 via telnet or Secure Shell
(SSH). By default the telnet server answers on port 23, the SSH server on port 22.
Logon via SSH with PuTTY
After authentication, type "cli help" into the Shell to learn about the usage of the command line interface. CLI
will stop after every call. You have to include 'cli' for every new call.
3.3.1
CLI Overview
The Command Line Interface mainly provides functions to read and write values of the MG101/102 configu-
ration parameters. In addition, the CLI provides functions to query status information.
Command
Return
cli get
string
cli set
void
cli configure
void
cli configureAll
void
cli network
string
cli select
void
cli status
string
cli help
string
cli exit
void
Ctrl+C
void
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
Description
Read values of one or more specified configuration parameters.
Write values of one or more specified configuration parameters.
Not for end user use!
Not for end user use!
Show available networks including Location Area Identities (LAIs)
Select the network provider defined by the supplied Local Area Identity (LAI) or
set the network selection method to automatic
Show a status overview of MG101/102
Print the cli help message (usage)
Not for end user use!
Abort a command. Exit from CLI
91 / 107
Advertisement
Table of Contents
