Cli Usage - RACOM MG101 User Manual

3.3.2

CLI Usage

Command Usage and Return Value
cli get 'cli get' is used to read values from configuration parameters.
Arguments include all configuration keys as described in chapter 3.2
Usage: cli get <key1>[&<key2>[...]]
Example: cli get user.admin.password
The return value is the value of the queried parameter.
Note: cli get <invalidKey> returns no error message
cli set 'cli set' is used to assign values to configuration parameters.
Arguments include all configuration keys as described in chapter 3.2
Usage: set <key1>=<value1>[&<key2>=<value2>[...]]
Example: cli set user.admin.password=admin02
'cli set' produces no return value and no error message. To check if the modification
took place, use 'cli get'
Note: cli set <invalidKey>=<correctValue> returns no error message
Note: cli set <validKey>=< inCorrectValue> returns no error message, no range
check is performed
cli configure Not for end user use!
cli configureAll Not for end user use!
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
92 / 107