Configuration Via The Mg101/102 Web Manager - RACOM MG101 User Manual

3 Configuration
MG101/102 holds different configurations, such as the factory configuration and the user configuration. The
user configuration can be modified by the user as follows:
•
Using the forms on the web pages of Web Manager (chapter 3.1)
•
Upload a new configuration file using the Web Manager (chapter 3.2)
•
Using the MG101/102 Command Line Interface (chapter 3.3)
If you are new to MG101/102 we recommend configuring it using the MG101/102 Web Manager. For batch
configuration upload configuration files.
3.1

Configuration via the MG101/102 Web Manager

The MG101/102 Web Manager can always be reached via the Ethernet interface. After the successful setup
the Web Manager can also be accessed via the mobile interface. Any up to date web browser may be used.
By default the IP address of the Ethernet interface is 192.168.1.1, the webserver runs on port 80.
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
17 / 107