Table of Contents
Advertisement
1.6.2
The Back Panel
The back panel has the interfaces described in the table below:
Panel
Label
Back
GPS Antenna
(
MG102-xGx
only)
Back
UMTS / GSM
Antenna
Back
COM
Back
Ethernet Ports
Back
Power
Back
Link/Activity
(Ethernet Ports)
Back
Speed 10/100
(Ethernet Ports)
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
Color
State
Function
-
-
GPS antenna connector (MG102-1GN and MG102-2GN)
Impedance: 50 Ohm
Connector: SMA female
MG102-1GN supports active GPS antennas.
MG102-2GN and MG102-2GW support passive GPS anten-
nas only
-
-
UMTS / GSM antenna connector
Impedance: 50 Ohm
Connector: SMA female
-
-
Sub-D 9 or RJ45 port
RS232 (default) or RS485 (configurable)
-
-
4 port Ethernet switch
The default IP address is set to 192.168.1.1.
-
-
Voltage feed connector (9-32 VDC)
green
on
Physical link
off
No physical link
flashing
Data transmission
green
on
Data rate 100 MBit/s
off
Data rate 10 MBit/s
Table 5: Components on the back panel
13 / 107
Advertisement
Table of Contents
