Configuration Parameters Of The Mg101/102 - RACOM MG101 User Manual

3.2

Configuration Parameters of the MG101/102

The information in this chapter is needed to configure MG101/102 via the Command Line Interface or File
Configuration. If you are using the Web Manager and its forms to configure MG101/102, you may skip this
chapter.
A configuration parameter consists of two main parts, its name (latter called key) and its value. The user
configuration file contains all parameters. Download this file (user-config.cfg) using the Web Manager to get
all parameters listed.
Racom has defined some types of parameters that are often used. The table below shows the defined pa-
rameter types. In addition other types of parameters may exist.
Parameter Allowed characters
Type
email a-z
A-Z
0-9
_-.
@ (mandatory)
hostname a-z
A-Z
0-9
_-.
ipaddress Numbers and dots
netmask Numbers and dots
username a-z
A-Z
0-9
_-.
@
password All but &, \", \'
phone number +
0-9
*
#
time 0-9, and :
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
Format Description
user@hostname String must include "@"
Second part must be a valid host-
name
Fully-Qualified Host Name (FQHN)
or host name
xxx.xxx.xxx.xxx Decimal dotted notation
xxx.xxx.xxx.xxx Decimal dotted notation
hh:mm:ss Time, e.g. for automatic software or
configuration update
78 / 107