Initial Access To The Web Manager - RACOM MG101 User Manual

3.1.1

Initial Access to the Web Manager

Step Description
Please connect the Ethernet interfaces of your computer and the MG101/102.
1.
If not yet enabled, please enable the Dynamic Host Configuration Protocol (DHCP) so that
2.
your computer can lease an IP address from MG101/102. Wait a moment until your PC has
received the parameters (IP address, subnet mask, default gateway, DNS server).
How to do using Windows XP:
Start > Connect To > Show all connections > Local Area Connection > Right Click > Properties >
Internet Protocol (TCP/IP) > Properties > Obtain an IP address automatically.
Alternative:
Instead of using the DHCP, configure a static IP address on your PC (e.g. 192.168.1.100) so that it is
operating in the same subnet as the MG101/102.
The factory default IP address is 192.168.1.1 The default subnet mask is 255.255.255.0.
Start a Web Browser on your PC.
3.
Type the MG101/102 IP address in the address bar:
(e.g. http://192.168.1.1)
Follow the instructions of the Web Manager to configure the device.
4.
User manual
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
18 / 107