Troubleshooting; Spare Parts; Ordering Spare Parts - unicraft HT 300 S Operating Instructions Manual

13 Troubleshooting

Faults
The lift table does not lower comple-
tely
The lift table cannot be raised

14 Spare parts

DANGER!
Risk of injury due to the use
of wrong spare parts!
Dangers may result for the user and damages as
well as malfunctions may be caused by using wrong
or damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
The manufacturer's warranty will become null and
void if non-permissible spare parts are being used

14.1 Ordering spare parts

The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
HT-Series | Version 1.01
Possible cause
Maintenance support not folded in
Clamped part in the lift table scis-
sors
The lift table overloaded
Defective pump
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of construction on the type plate which is
fixed on the lift table.
Example
The guide roll for the lift table HT 300 S bestellt werden.
The guide roll have the position number 13 in the spare
parts Drawing.
When ordering spare parts, send a copy of the spare
parts drawing with the marked component (guide roll)
and marked item number 13 to the authorised dealer or
to the spare parts department and provide the following
information:
- Type of device: Lift Table HT 300 S
- Artikelnummer:
- Position number: 13
In case of service, the following drawing shall help to
identify the necessary spare parts.
Troubleshooting
Solution
Slightly raise the lift table, fold in the
maintenance support.
Slightly raise the lift table, remove
part.
Reduce the load
Replace the pump
6100300
19