Introduction; Copyright; Customer Service; Limitation Of Liability - unicraft HT 300 S Operating Instructions Manual

1

Introduction

You have made a good choice by purchasing the
UNICRAFT lift table.
Read the operating manual thoroughly before commissioning
the machine.
It gives you information about the proper commission-
ing, intended use and safe and efficient operation and
maintenance of your lift table.
The operating manual is part of the lift table package.
Always keep this operating manual in the location where
your lift table is being operated. All local accident pre-
vention regulations and general safety instructions for
the operating range of your lift table must also be com-
plied with.

1.1 Copyright

The contents of these instructions are copyright. They
may be used in conjunction with the operation of the
electric chain hoist. Any application beyond those de-
scribed is not permitted without the written approval of
Stürmer GmbH.
For the protection of our products, we shall register
trademark, patent and design rights, as this is possible
in individual cases. We strongly oppose any infringe-
ment of our intellectual property.

1.2 Customer service

Please contact your dealer if you have questions con-
cerning your lift table or if you need technical advice.
They will help you with specialist information and expert
advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax: 0049 (0) 951 96555-111
Email: service@stuermer-maschinen.de
Spare part orders:
Fax: 0049 (0) 951 96555-119
Email: ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application-which
then could be shared and be valuable to develop our
products even further.
HT-Series | Version 1.01

1.3 Limitation of liability

All information and notes in these operating instructions
were summarised while taking applicable standards
and rules, the state-of-the-art technology and our long-
term knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the ex-
planations and presentations described here in case of
special models, when using additional ordering options
or due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-
tions of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2

Safety

This section provides an overview of all important safety
packages for the protection of operating personnel as
well as for safe and fault-free operation. Other task-
based safety notes are included in the paragraphs of
the individual phases of life.

2.1 Symbol explanation

Safety instructions
The safety notes in these operating instructions are
highlighted by symbols. The safety notes are introduced
by signal words which express the concern of the risk.
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not
avoided.
Introduction
3