Table of Contents
Advertisement
6
Description of device
Illustrations in these operating instructions are for basic under-
standing only and may differ from the actual version.
Hydraulic
cylinder
Foot
pedal
All side
rollers
Swivelling
frame
Fixing
swivel-
ling frame
Guide roll
Counterweight
Guide roll
Fig. 3: Description of devices HT 300 S and HT 300 M (top),
HT 300 M PSR (center), HT 300 L (bottom)
HT-Series | Version 1.01
Platform of the
lift table
Scissors
Maintenance
support
Guide roll
Assembly
frame
Locking
swivelling
frame
Lift Table
Platform of the
lift table
Scissors
Foot
pedal
Hydraulic
cylinder
Platform of the lift table
with different accessories
(optional)
Guide
roll
Fig. 4: Description of the lift table HT 600
6.1 Function
The height adjustment of the lifting table is based on the
scissor principle. By actuating the foot pedal down-
wards, the scissors are moved by hydraulic force and
the lift table platform moves upwards. When the foot le-
ver is released, the lift table movement comes to a
standstill and the lift table platform remains in this posi-
tion. By lifting the foot lever, the lift table platform is lo-
wered for the duration of the operation.
The hydraulic power is transmitted via the foot pump to
the hydraulic cylinder. Foot pump and hydraulic cylin-
der are a fixed unit.
HT 300 M PSR
- Provides one person with easy loading of panels
onto the platform frame and pivoting from vertical
to horizontal position
- Swivel frame with two layer locking in vertical and
horizontal position
6.2 Accessories work plates (optional)
HT 300 S
- Smooth metal work plate, 1000 x 600 mm
- Beech multiplex work plate, 1250 x 800 mm
- Beech multiplex hole grid work plate, 1250 x 800
mm
HT 300 M
- Beech multiplex hole grid work plate,
1600 x 790 mm
HT 300 M PSR
- with swivelling frame (scope of delivery)
Description of device
Maintenance
support
Foot
pedal
Hydraulic
Scissors
cylinder
11
Advertisement
Table of Contents
