Type Plate; Transport, Packaging, Storage; Transport; Packaging - unicraft MH 3 Operating Instructions Manual

4.1 Type plate

Fig. 1: Type plate machine lift MH 20
5

Transport, packaging, storage

5.1 Transport

Check the Hydraulic machine lift on delivery for any visi-
ble transportation damage. If you notice any damage to
the device please report this immediately to the carrier or
dealer.
NOTE!
The Hydraulic machine lift should be protected from
humidity.

5.2 Packaging

All used packaging materials and packaging aids are re-
cyclable and should be taken to a materials recycling de-
pot to be disposed of.The delivery packaging is made of
cardboard, so please dispose carefully by having it chop-
ped up and given to the recycling collection.The film is
made of polyethylene (PE) and the cushioned parts of
polystyrene (PS). These materials should be taken to a
collection point for recyclable materials or to the local
waste disposal company.

5.3 Storage

Oil the Hydraulic machine lift and store in a frost-free and
dry environment. Only store the Hydraulic machine lift
with the claw lowered and the drain valve closed. Do not
place anything on the hydraulic jack.
MH-Series | Version 2.01
Transport, packaging, storage
6

Description of the Device

Illustrations in these operating instructions may de-
viate from the original.
1 Hand lever
2 Carrying handle
3 Base plate
3
4
Fig. 2: Description of the device
1 Hand lever
2 Carrying handle
3 Lowering valve
4 Claw
5 Base plate
1
2
5
7