Operating In Water Or Mud - Hitachi ZAXIS 135US-5B Operator's Manual

Operating in Water or Mud

The machine can be operated in water up to the upper edge of
the upper rollers only if worksite footing has sufficient strength
to prevent the machine from sinking past the upper edge of
the upper roller, and only if the water is flowing slowly.
When operating in such conditions, check the machine's
position often. Reposition the machine if necessary.
Avoid submerging the swing bearing, swing gears and center
joint.
If the swing bearing, swing gears and center joint are
submerged, remove the drain plug to drain mud and water.
Clean swing area. Install plug. Lubricate swing internal gear
and swing bearing.
Swing Internal Gear Capacity
ZX135US-5B
ZX225US-5B, 225USLC-5B
Lubricate swing bearing. (See Maintenance Guide, 500 hours)
DRIVING THE MACHINE
9 L
17 L
4-7
Model
ZX135US-5B
ZX225US-5B, 225USLC-5B
A
M104-05-009
A
660 mm
770 mm