Cigar Lighter; Using Cigar Lighter; Using Cigar Lighter Port As External Power Source - Hitachi ZAXIS 135US-5B Operator's Manual

Cigar Lighter

Using Cigar Lighter

IMPORTANT: In case the cigar lighter does not pop out
automatically 30 seconds after pushing the cigar
lighter in, pull out the cigar lighter manually. Then,
consult your nearest Hitachi dealer.
1. Turn key switch (1) to the ACC or ON position.
2. Press and release the lighter knob.
3. The cigar lighter knob will return to the original position
when the lighter becomes usable. Pull the cigar lighter
out to use.
4. After using the cigar lighter, insert the cigar lighter into
the panel until the knob is seated in the original position.

Using Cigar Lighter Port as External Power Source

Use the cigar lighter port to supply power to lighting
equipment for servicing the machine.
IMPORTANT: Only 24 V electric power is available from
the cigar lighter port on this machine.
Never connect accessories that use power other than
24 V. Damage to the batteries and accessories may
result.
Do not supply power to accessories for a long time
without running the engine. Failure to do so may
discharge the batteries.
1. Pull the lighter knob out.
2. Correctly insert the accessory socket into the cigar
lighter port.
3. Turn key switch (1) to the ACC or ON position. Power is
supplied to the connected accessory.
4. After using the accessory, disconnect the accessory
socket and insert the cigar lighter into the port.
OPERATOR'S STATION
Cigar Lighter
1-100
1
MDCD-01-030
MDCN-01-006