Security Functions (Optional)
Input Password
IMPORTANT:
When required to activate the numeric keypad
function, consult your nearest Hitachi dealer.
If the password is forgotten, the machine must be
modified. Be extremely careful not to forget the
password.
1. Turn the key switch ON. After the starting screen is
displayed, the password input screen will be displayed.
2. Input a password by using the numeric keypad.
3. The monitor unit matches the input password to the
registered one. If they match, the basic screen displays.
The engine is ready to run. If an incorrect password is
input three times, a buzzer sounds for thirty seconds.
During that time, the buzzer does not stop even if the
key switch is turned ON/OFF.
f
NOTE: If you make a mistake while entering the password,
push the CLEAR key in order to erase the entered characters.
4. After thirty seconds, if the key switch is turned to the ON
position, the starting screen displays and the password
input screen displays again. Then the password can be
input again.
5. If an incorrect password is input again, the buzzer
sounds for a further thirty seconds.
OPERATOR'S STATION
1-15
Starting Screen
Password Input Screen
Basic Screen
MDAA-01-003
MDAA-01-085EN
MDAA-01-086EN
MDAA-01-001