Precautions; Installation - Sony MJ100 Instruction Manual

1-2. Precautions

When installing the MJ100/MJ110, observe the following to
prevent noise interference from other equipment.
1. Provide noise-preventive measures to relays,
solenoids and motors connected to the MJ100/MJ110.
2. Take preventive steps when the noises from other
equipment may disturb the power supply line to the
units.
3. Shield the output cable correctly according to the
instruction manual.
Be sure to ground the MJ100/MJ110 with an earth wire
or by mounting it on the machine with screws.
2 (E)

1-3. Installation

. Use the MJ100/MJ110 in the temperature range of 0 to
45dC / 32 to 113dF. Do not expose it to the sunlight or
source of heat. A well-ventilated place is preferable.
. Separately route the head cable and output cable from
the power line.
. When installing the interpolator in a place where it may
be exposed to water splashes, make it water-proof by
providing a cover or by some other means.