Table of Contents
Advertisement
Please Read This First
Manual Structure
This product includes the following manuals to
be used according to the situation.
Before Using This Unit (ZRD-C12A/ZRD-C15A/
ZRD-B12A/ZRD-B15A, ZRCT-300)
This includes important safety precautions,
specifications, etc.
Installation Manual
This includes information on installation, initial
setup, equipment adjustment procedures, etc.
Refer to this manual when changing equipment
settings or performing readjustments after
installation as well.
Operating Instructions (this document)
This includes information on video input
selection, picture quality adjustment, parts
identification, etc. Refer to this manual when
performing general operations.
Service Manual
This is intended for use by service personnel and
includes information on diagnosing
malfunctions and instructions on repair.
Condensation
If the unit is suddenly taken from a cold to a
warm location, or if ambient temperature
suddenly rises, moisture may form on the outer
surface of the unit and/or inside of the unit. This
is known as condensation. If condensation
occurs, turn off the unit and wait until the
condensation clears before operating the unit.
Operating the unit while condensation is present
may damage the unit.
Security
• SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
• Depending on the operating environment,
unauthorized third parties on the network may
be able to access the unit. When connecting
the unit to the network, be sure to confirm that
the network is protected securely.
• This unit is equipped with a maintenance
function performed via a network.
Maintenance may be performed with your
consent.
• From a safety standpoint, when using the unit
connected with the network, it is strongly
recommended to access the Control window
via a Web browser and change the access
limitation settings from the factory preset
values.
Also, it is recommended that you set a
password with a sufficiently long character
string that is hard to guess by others, and that
you store it safely.
• Do not browse any other website in the Web
browser while making settings or after making
settings. Since the login status remains in the
Web browser, close the Web browser when you
complete the settings to prevent unauthorized
third parties from using the unit or harmful
programs from running.
• When connecting this product to a network,
connect via a system that provides a protection
function, such as a router or firewall. If
connected without such protection, security
issues may occur.
Burn-in
Permanent burn-in may occur if a still image is
displayed for a prolonged period of time. Playing
a video with moving images may reduce the
severity of burn-in once it occurs, but it will not
remove the burn-in completely.
Defective pixels
Thus a very small proportion of pixels may be
"stuck," either always off (black), always on (red,
green, or blue), or flashing. In addition, such
"stuck" pixels may appear spontaneously over a
long period of use due to the physical
characteristics of the organic light-emitting
diodes.
Such occurrences do not indicate a malfunction.
General Precautions
• Avoid getting the product wet. In the event of
accidental contact with liquids, do not turn on
the power, and contact a service
representative.
3
Advertisement
Table of Contents
