Appendix; Safety Precautions; Notes On Installation; Specifications - Sony UPA-PC500 Manual

Appendix

Safety Precautions

• Operate the unit on 100 to 240 V AC, 50/60 Hz only.
• Be careful not to set or drop any heavy objects on the
power cord, or to damage the power cord in any way.
Never operate this unit with a damaged power cord.
• To disconnect the power cord, pull it out by the plug.
Never pull the power cord itself.
• To reduce the risk of electrical shock, always unplug
the unit from the electrical outlet before cleaning and
servicing the unit.
• If any solid object or liquid falls into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it any further.
• If the unit will not be used for an extended period,
disconnect the power cord from the power outlet.
• The unit's touchscreen is made of glass. Take care not
to scratch or damage the touchscreen.
• Do not jar or drop the unit.
• Do not handle the unit roughly.
• Never disassemble the unit.

Notes on Installation

• Install the unit on a level surface. Do not install the unit
on a slant or on its side, as this could damage the unit.
• Do not install the unit in any location subject to:
– Instability
– Excessive dust
– Extremely high or low temperatures
– Vibration
– High humidity
– Direct sunlight
• Do not block the ventilation holes on the unit, as this
could result in damage to the unit.
Condensation
If the unit is brought directly from a cold location to a
warm one or is placed in an extremely warm or humid
room, water droplets may form inside the unit. (This is
called "condensation.") Using the unit in this condition
could damage the unit or cause it to malfunction. If you
think that condensation may have formed inside the unit,
allow time for it to evaporate before using the unit.
Transportation
Before transporting the unit, remove all media from the
slots and drives, and then pack the unit carefully in the
original packing material and box. If you do not have the
original packing material, pack the unit carefully so that
it can withstand shocks and impacts that may occur
during transport.
12
Appendix

Specifications

General
Power supply 100 V to 240 V AC, 50/60 Hz
Current consumption
5.0 A to 3.0 A
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Dimensions (w x h x d)
406 x 480 x 244 mm
(16 x 19 x 9 5/8 in.), excluding
protrusions
Mass Approx. 23 kg (51 lb.)
Display 15.0" TFT color LCD
1024 x 768 pixels
Touchscreen method
Analog resistive
Compatible media
Built-in card reader
• "Memory Stick"
• "Memory Stick Duo"
• "Memory Stick PRO"
• "Memory Stick PRO Duo"
• SmartMedia
• xD-Picture Card
• SD Memory Card
• miniSD
• MultiMediaCard (MMC)
• RS-MMC
• CompactFlash
• USB Memory Devices
Built-in combo drive
• Read: CD-ROM/CD-R
DVD-ROM/DVD-R/DVD+R
• Write: CD-R
Compatible image formats
Exif ver. 2.1 or later (JPEG standard)
BMP (uncompressed, 24-bit Windows
format)
TIFF (uncompressed, 24 RGB bits)
Thermal receipt printer
Paper width 58 mm, paper roll diameter
50 mm (Inner core diameter 12 mm,
Outer core diameter 18 mm)
Supplied Accessories
Power cord (1)
Cabinet keys (2)
Eject pin (1)
Installation Guide (1)
Operating Instructions (1)
User's Guide (1)
Warranty booklet (1)
End User License Agreement (1)
Design and specifications are subject to change without
notice.